+- NightOwl Forums (https://forums.nightowlpro.com)
+-- Forum: The Crypt (https://forums.nightowlpro.com/forumdisplay.php?fid=12)
+--- Forum: Off Topic (https://forums.nightowlpro.com/forumdisplay.php?fid=9)
+--- Thread: Fill Or Slush? (/showthread.php?tid=13865)
Fill Or Slush? - Hackdroot - 09-17-2006
Which is the faster easier way to build up a pull. Slush casting repeatedly, or filling and allowing to dwell. I\'ve been using the following method and was wondering if theres a faster/more convienient way to build up a latex pour.
After wetting the mold, I slush the first layer and drain for a few mins.
I let that dry for about 5-10mins and then slush another layer. Then drain for 10 minutes this time.
I repeat the slush/dry cycle several times since the pulls I want need to be thick.
Would it be eaiser if I just fill-dwelled after doing the initial slush coatings?
Thanks.
-Eric
Fill Or Slush? - SlasherHouse - 09-17-2006
It would be easier to fill and dwell. :thumbsup:
Fill Or Slush? - frosty - 09-17-2006
Well i think its best to just fill the mould and leave it, other people do it differently though.
Fill Or Slush? - nightmareofdarkness - 10-27-2006
how long do you let it dwell for?
Fill Or Slush? - Hauntmaster9 - 10-27-2006
I fill the mold and let it sit for 45 minutes then I empty it let the first coat gel then refill and let it sit for another 45 minutes then empty and let dry.
Fill Or Slush? - nightmareofdarkness - 10-27-2006
thanks
