NightOwl Forums
Silicone Question? - Printable Version

+- NightOwl Forums (https://forums.nightowlpro.com)
+-- Forum: The Crypt (https://forums.nightowlpro.com/forumdisplay.php?fid=12)
+--- Forum: Off Topic (https://forums.nightowlpro.com/forumdisplay.php?fid=9)
+--- Thread: Silicone Question? (/showthread.php?tid=15844)



Silicone Question? - theStoic - 01-12-2007

Can you pour fresh Silicone over cured Silicone?....

~j


Silicone Question? - SuperDanDrista - 01-12-2007

Not sure why you\'d want to do that...explain more if you can...

Silicone sticks to one material....silicone...

There\'s so many different formulas out there. Tin based and platinum based might not be too good to put together but i\'ve done molds with one tin based silicone and had to finish it with another tin because I didn\'t have enough..it worked too even though it was mixed colors


Silicone Question? - theStoic - 01-12-2007

well, there was a hole in my wall/box and when i got back from work in time for it to dry it had leaked out :down: and left a very thin coat on top of it...and i want it thicker...so, pour more or start over?

and yes silicone sticks to silicone....But, what is the affect of pouring raw silicone on cured silicone?....good/bad/anything?

Thanks,
~j