+- NightOwl Forums (https://forums.nightowlpro.com)
+-- Forum: The Crypt (https://forums.nightowlpro.com/forumdisplay.php?fid=12)
+--- Forum: Off Topic (https://forums.nightowlpro.com/forumdisplay.php?fid=9)
+--- Thread: Fred Dead (/showthread.php?tid=2967)
Fred Dead - jasonpt3 - 10-29-2004
does anyone make a final nightmare mask?
Fred Dead - puckface - 10-29-2004
DMC\'s part 5 looks similar
Fred Dead - jasonpt3 - 10-29-2004
does dmc have a site. im not a real big fred fan and im a j fan but i like final nightmare alot. doesnt someone make them with a zipper also? i have checked alot of other sites havent seen a final out there.
also i have a question on gloves when you make the part that goes onto the back plate on the fred glove wont that keep you from moving your lower part of your finger? in the movie i see it moves but why doesnt brake off from flexing so much im just wondering because i plan on makking a glove but im not to sure about that part.
-Chad
Fred Dead - deadhomie - 10-29-2004
Quote:"does dmc have a site"[url=\"http://www.davidmillercreations.com\"]www.davidmillercreations.com[/url]
Fred Dead - DEATH - 10-29-2004
Quote:also i have a question on gloves when you make the part that goes onto the back plate on the fred glove wont that keep you from moving your lower part of your finger? in the movie i see it moves but why doesnt brake off from flexing so much im just wondering because i plan on makking a glove but im not to sure about that part.Several of the gloves used in the films are plastic so in some scenes you will see them bend and flex. In general, most of the screen used gloves aren\'t built as sturdy as the replicas you find online.
-Chad
Fred Dead - WilliamAbuJannah - 10-29-2004
ain\'t that the truth. The movie gloves were weak little props. Just look how the first finger blade in pt one got snapped off and resoldered, making the trademark \'bend\' in the blade.
Plus the copper section you\'re thinking about doesn\'t really \'flex\' unless you do something foolish with the glove on like try to make a fist. Even then, in most cases the metal will bend or a rivet will pop before the actual copper will break. Copper would have to bend back and forth quite a few times for it to get enough metal fatique to be weakened enough to break.
Usually the knuckle sections ride and down on the post of the knuckle rivet, depending on how tight those rivets are installed.