+- NightOwl Forums (https://forums.nightowlpro.com)
+-- Forum: The Crypt (https://forums.nightowlpro.com/forumdisplay.php?fid=12)
+--- Forum: Off Topic (https://forums.nightowlpro.com/forumdisplay.php?fid=9)
+--- Thread: Hockey Snaps? (/showthread.php?tid=610)
Hockey Snaps? - puckface - 04-06-2004
Where can I get the snaps for a part 3/4 hockey mask? I need 5, 3 for the straps, and two under the cheek triangles?
Thanks
Hockey Snaps? - travsall - 04-06-2004
Go to any fabric store, they\'ll have them in small kits that include the punches you\'ll need to close them. Don\'t buy a gun though, a hammer works just as well.
For part 3 you need the 3 snaps for the straps, and the lower cheek snaps are the under part only, NOT the top piece. Little know fact
Hockey Snaps? - puckface - 04-06-2004
I know, as if it had other straps to snap on to it, like a real hockey mask
Hockey Snaps? - Eddie - 04-07-2004
Also, when you attach them, you can just use a small rivet to attach the snaps, just make sure you have something with a hole through it that will fit in the bottom part of a snap to push on the rivet. That\'s how I put them on with my HHM.
Eddie
Hockey Snaps? - travsall - 04-07-2004
Quote:I know, as if it had other straps to snap on to it, like a real hockey mask
No, actually you only use the part of the snap assembly that goes through the back of the mask, not the piece that sits on the outside that accepts the snap top. Here, have a look at the Cropsy mask for waht I mean.
Hockey Snaps? - Eddie - 04-07-2004
I thought they used the top part that accepts the snap in part 3? I could have sworn they did.
Eddie
Hockey Snaps? - Cyclonus - 04-07-2004
That mask is so damn incredible, but I\'m almost certain the cheek snaps are wrong. I\'ve always thought so. Still, its probably one of the best part 3 reps I\'ve EVER seen.
My 2,
Cyclonus
Hockey Snaps? - Eddie - 04-07-2004
Yeah I\'m pretty sure the part that holds the upper snap was shown.
Eddie
Hockey Snaps? - VF31 - 04-07-2004
this has confused me for a bit also...some say they are right, others wrong....
but upon closer inspection watchin part 3 i notice the snaps arent as big as the snaps most ppl use....now i still cant tell if they have the accepting peice on them in the flick, but they are small. so i still dk..lol
both styles look good imo
Hockey Snaps? - goaliehack - 04-07-2004
From what I can see both are wrong. They do not appear to be the heavy duty snap fasener, however, they do not appear to be as small as cropsys. The look a medium flat size, almost like a washer to me.