Freddy Glove Details?

[krazedkilla ●]

Thank you kind sir!

[post=\"147787\"]<{POST_SNAPBACK}>[/post]

No problem, glad I could help.

[josephchoi ●]

and backplate is BRASS not copper.

[RavenMedia ●]

firstly the part 1 and 2 was not made from copper pipe, it was sheet as always otherwise there wouldnt have been screen used templates floating around the net!

righty for a part 4...

24 ga copper and brass will be suited. brass for finger progs also.

for the glove...try out magla/stanley gloves. they work a treat but are tough to get hold of. a guy on ebay has a pair of xl ones that need to be snapped up.

aviation (center cut) snips work the best. for sanding i use wet and dry sandpaper sometimes (if needed)

its the blades that are usually the problem for a part 4, steak knives grinded down can work but to get tham all the same shape can be hell.

pm me if you need any in depth help

Andy

[krazedkilla ●]

firstly the part 1 and 2 was not made from copper pipe, it was sheet as always otherwise there wouldnt have been screen used templates floating around the net!

righty for a part 4...

24 ga copper and brass will be suited. brass for finger progs also.

for the glove...try out magla/stanley gloves. they work a treat but are tough to get hold of. a guy on ebay has a pair of xl ones that need to be snapped up.

aviation (center cut) snips work the best. for sanding i use wet and dry sandpaper sometimes (if needed)

its the blades that are usually the problem for a part 4, steak knives grinded down can work but to get tham all the same shape can be hell.

pm me if you need any in depth help

Andy

[post=\"147792\"]<{POST_SNAPBACK}>[/post]

Interesting, pm sent! I believe these are the gloves Andy is talking about; [url=\"http://cgi.ebay.com/STANLEY-COWHIDE-GRAIN-LEATHER-WORK-GLOVES-X-LARGE_W0QQitemZ7600373898QQcategoryZ63910QQssPageNameZWDVWQQrdZ1QQcmdZViewItem\"]http://cgi.ebay.com/STANLEY-COWHIDE-GRAIN-...1QQcmdZViewItem[/url]

[Hauntmaster9 ●]

Thanks again guys,
Raven I sent you a pm.

[Hauntmaster9 ●]

Does anyone know where to get sheet copper and brass? I\'ve checked home depot and several similar stores and none of them know where i could even find any.

[ChemicallyUsed ●]

im in the same boat haha, im even having problems finding cap-rivets