+- NightOwl Forums (https://forums.nightowlpro.com)
+-- Forum: The Crypt (https://forums.nightowlpro.com/forumdisplay.php?fid=12)
+--- Forum: Off Topic (https://forums.nightowlpro.com/forumdisplay.php?fid=9)
+--- Thread: Help: Slit On Masks (/showthread.php?tid=1020)
Help: Slit On Masks - DragonFire - 05-15-2004
I have a full head latex mask, and I was woundering if anyojne knew how I could cut a slit in the back. I\'m just making sure becase if theres a special way to do it, and i just cut it with scissors and it falls apart I\'m going to hate myself.
Thanks
Help: Slit On Masks - SuperDanDrista - 05-16-2004
You need to first get a leather hole puncher. Decide where you want the slit to start, punch the hole. Then, with a heafty pair of scissors, cut the slit slowly. Pretty easy. The hole is important so as the slit does not go any further.
Help: Slit On Masks - DragonFire - 05-16-2004
Thank you appreciate the help.
Help: Slit On Masks - travsall - 05-16-2004
Good advice Dan, but you might want to start cutting th slit first, cut it up a little bit at a time, then test fit the mask until it slides on comfortably. Then make the hole at the top of the slit.
Help: Slit On Masks - SuperDanDrista - 05-16-2004
good call..I\'ve only worn about 10% of the masks I own so what do I know
I prefer to get them uncut anyway