+- NightOwl Forums (https://forums.nightowlpro.com)
+-- Forum: The Crypt (https://forums.nightowlpro.com/forumdisplay.php?fid=12)
+--- Forum: Off Topic (https://forums.nightowlpro.com/forumdisplay.php?fid=9)
+--- Thread: Scuff Marks! (/showthread.php?tid=1784)
Scuff Marks! - Pugsly - 08-02-2004
I am working on a blank doing it part 3 style and i was wondering the best way to do scuff marks on it?Any help would be apreciaitted.
Scuff Marks! - DrownedGhoul7 - 08-02-2004
Oh shit,if i could remember what the scuff marks look like then I might be able to help you.Even though i have never worked on a blank before Im really good at this type of stuff.Any pics?
See ya,
Chris
Scuff Marks! - travsall - 08-02-2004
Hey Pugs, best way I\'ve found is do the scratches first, then do a very light black wash over them to bring them out. After you have that, take a little of the black wash on your finger and just rub it lightly on the mask for the scuffs.
Scuff Marks! - The13thDreamShape - 08-02-2004
why not rub pencil on it? then seal it? :ph34r:
Scuff Marks! - jason8844 - 08-03-2004
im not saying this is the best way just what i did...i put a litle bit of black acrylic paint on a knapkin and smeared it wear i wanted it, on the nose around the sides and top when it dried i sanded over the black acrylic paint just so it was noticible this made a great scuff mark on some places sand it down to the plastic if your using a white plastic mask it will make 2 colers the white plastic and white primer with black around it well i hope it helped you,
Nick