+- NightOwl Forums (https://forums.nightowlpro.com)
+-- Forum: The Crypt (https://forums.nightowlpro.com/forumdisplay.php?fid=12)
+--- Forum: Off Topic (https://forums.nightowlpro.com/forumdisplay.php?fid=9)
+--- Thread: Hockey Blank (/showthread.php?tid=29129)
Pages:
1
2
Hockey Blank - mybankey - 05-21-2009
Hi everyone,Well I just got in an abs Hockey Mask blank from Jeff(JDF) and would like to say thanks and what fast, great customer service!I have never done one of these before and wanted to know the best ways to cut the eyes and the holes out? And what size drill bit do I use? Drill from front or behind?Any sugestions,Tom <img src=\"style_emoticons/<#EMO_DIR#>/smile.gif\" style=\"vertical-align:middle\" emoid=\"
\" border=\"0\" alt=\"smile.gif\" />
Hockey Blank - mperaginejr - 05-21-2009
Dremel fr the eyes and drill for the holes.
Hockey Blank - mybankey - 05-21-2009
Cool, thanks VF!
Hockey Blank - WarLocK - 05-21-2009
Dude, get a UNIBIT. It's about $14-$17 depending on where you live. But it's the best way to drill hockey masks (smooth every time). I hate seeing all of these hockey masks drilled w/ an actual drill bit. It's all jagged/choppy... Invest in the unibit and you will be happy. Drill down to the 9th notch if you're doing a pt 3 or 4.<img src=\"http://www.tradetufftools.com/images/unibit_1.gif\" border=\"0\" class=\"linked-image\" />
Hockey Blank - mybankey - 05-21-2009
<!--quoteo(post=314380:date=May 21 2009, 02:39 PM:name=WarLocK)<div class=\'quotetop\'>QUOTE (WarLocK @ May 21 2009, 02:39 PM) <a href=\"index.php?act=findpost&pid=314380\"><{POST_SNAPBACK}></a></div><div class=\'quotemain\'><!--quotecDude, get a UNIBIT. It's about $14-$17 depending on where you live. But it's the best way to drill hockey masks (smooth every time). I hate seeing all of these hockey masks drilled w/ an actual drill bit. It's all jagged/choppy... Invest in the unibit and you will be happy. Drill down to the 9th notch if you're doing a pt 3 or 4.<img src=\"http://www.tradetufftools.com/images/unibit_1.gif\" border=\"0\" class=\"linked-image\" /><!--QuoteEnd</div><!--QuoteEEndThankyou very much!
Hockey Blank - FreddysNightmare - 05-21-2009
Hey man, I got a blank off e bay and I am trying to do one up too. I have used a small drill bit for the air vent holes and they are looking good, but man I am struggling with getting the eyes just right on it. lol. Its been stressing me out a bit so I am feeling in future I would like to buy one already drilled just to take the hassel out of it. <img src=\"style_emoticons/<#EMO_DIR#>/laugh.gif\" style=\"vertical-align:middle\" emoid=\":laugh:\" border=\"0\" alt=\"laugh.gif\" />
Hockey Blank - BELLAMY - 05-21-2009
Im going to try this bit Warlocks recommending! Im sick of having to dremel the holes after with a sanding bit!
Hockey Blank - WarLocK - 05-21-2009
<!--quoteo(post=314385:date=May 21 2009, 03:24 PM:name=BELLAMY)<div class=\'quotetop\'>QUOTE (BELLAMY @ May 21 2009, 03:24 PM) <a href=\"index.php?act=findpost&pid=314385\"><{POST_SNAPBACK}></a></div><div class=\'quotemain\'><!--quotecIm going to try this bit Warlocks recommending! Im sick of having to dremel the holes after with a sanding bit!<!--QuoteEnd</div><!--QuoteEEndYou will thank me later. I'm sorry you've been doing that for so long. I tried drilling once w/ a regular bit... had to sand the holes and it was a pain. The unibit will save you time and headache.
Hockey Blank - IbDaToNeGuY - 05-21-2009
now will this unibit work with dremels or would someone have to buy a whole new drill if one like myself doesn't own a drill ? mike,
Hockey Blank - mperaginejr - 05-21-2009
GOd it will be ncie to not have to sand the holes anymore...I knew the size of bits for all the masks, didn't know about these...thanks a ton...