NightOwl Forums
Painting Styrofoam... - Printable Version

+- NightOwl Forums (https://forums.nightowlpro.com)
+-- Forum: The Crypt (https://forums.nightowlpro.com/forumdisplay.php?fid=12)
+--- Forum: Off Topic (https://forums.nightowlpro.com/forumdisplay.php?fid=9)
+--- Thread: Painting Styrofoam... (/showthread.php?tid=13572)

Pages: 1 2


Painting Styrofoam... - Martoch - 09-03-2006

Hey guys!
Big Grin

We picked up 20 styrofoam heads from our local Party City (great store for Halloween goodies) for $2 a head, but we\'re not sure how to paint them up to look all creepy. Airbrushing is out of the question, so what do you suggest we use? I\'m assuming that some paints will probably eat away at the styrofoam? Please help...we\'ll take any suggestions/recommendations from you guys.

Thanks in advance,
~Mike


Painting Styrofoam... - frosty - 09-03-2006

Yeah a lot of paints eat into styrofoam, stay away from celulose based paints, acrylics are ok, how about adding latex and tissue to some of them, make a nice rotting effect, throw some sand into the latex to get a gritty texture, works great, there are spray cans of acrylic paints around, you just got to find them,


Painting Styrofoam... - Martoch - 09-03-2006

Thanks, Frosty...we do have access to liquid latex if that\'s what you\'re referring to. However, we have very little experience with it except for when adding it to our skin to create a scarred look. Can we just mix normal beach sand (we live next to the beach here in FL) with the liquid latex? Sorry for the seemingly dumb questions, but I\'d rather ask before I screw it up.
Tongue
Hmmm...spray acrylic...I\'ve never seen it, but I\'ll definitely call around to see if we can get some.
Smile


Painting Styrofoam... - nightmareofdarkness - 09-03-2006

i saw a tutorial on a site a while ago on corpsifying a foam head with latex and cotton balls,it turned out pretty good,if i can find it ill pm you unless someone here has a better way


Painting Styrofoam... - frosty - 09-04-2006

Yes any sand should do, just add it bit by bit tillyou get a gritty texture, you can just slop it on over cotton balls tissue etc, spray hair color could work as well, never tried it though


Painting Styrofoam... - englundisgod - 09-05-2006

i made a styro foam sledge hammer head and you first have to paint it with latex based house paint sorta like acts as a primer and it will not eat it like alot of the glues but white elmers glue is goo and then use acryllic and even sparay piants

- Aaron
englundisgod/gunnarisgod


Painting Styrofoam... - Mutilated - 09-05-2006

I used flat out acrylics and they worked great.


Painting Styrofoam... - nightmareofdarkness - 09-06-2006

check out this site [url=\"http://www.thewidowsden.com/zombiepg1.htm\"]http://www.thewidowsden.com/zombiepg1.htm[/url]


Painting Styrofoam... - Martoch - 09-06-2006

That is just too damn cool! Thanks for the link.
:thumbsup:


Painting Styrofoam... - Dahone - 09-07-2006

www.fxwarehouse.com is in Florida....
They have latex.
Or you can go old school and mix up some paper mache.
Here are some recipes: [url=\"http://familycrafts.about.com/cs/papermache/a/blpmpastes.htm\"]paper mache[/url]