10-22-2008, 03:11 PM
I'm not from the USA and you guys seem to have a bigger range of stuff available there so you should be okI use a latex and acrylic paint as a base coat with most jobs and then air brush arylic in over that. I don't think you use air brush acrylic straight through the brush as it would need to be thinned out with something, never done it so won't go there.I use FW inks for my work thinned out with IPA (alcohol)most people with use a 5 min rapid set 2 part epoxy glue that you get from the hardware store for the eyes. you might need to seal them first with something so you don't smudge your paint job. For that I use plasti-kote Krystal clear, you can get it in matt , satin and gloss.Don't know what glue works best for hair mateHope that helps a bitAll the best