11-02-2005, 10:48 PM
Jason part 7 HOW TO
Mask
RAW2 from Justin on NIGHTOWLpro.com
I cut out the eyes and nose to see and breathe better
[B]Back Spine
Buy Justin’s RAW Back piece
Hockey
In bought this mask on Ebay
I don’t know the seller’s ID
Make sure it looks beat up and dirty
Clothes
Go to the local thrift store and find a Olive Green Shirt and Long Olive Green pants (the pants should be about 4-5 inches longer than your feet.
Buy some flat green and flat black camouflage spray paint from a hardware store.
Buy a tight black long sleeve shirt and black stretch pants (woman’s are okay)
Buy the “zombie” costume or pieces somewhere.
Buy some liquid latex from a costume store or from online (it’s really easy to work with)
Get a roll of paper towel or toilet paper
Get some flat dark brown and tan spray paint
Buy a Black and Red Sharpie pen
Once you have all these pieces put on the black shirt and pants, put on the zombie pieces on top of that and pin the zombie pieces in place, take the suit off.
Brush the liquid latex around the edges of the zombie pieces, adhering them to the shirt and pants in place.
After the first layer of latex dries, apply a second and third coat, before the third layer dries apply the paper towel or toilet paper onto the latex and brush another coat on after that (the paper towel gives texture and looks like gross skin when it dries)
Brush on the latex on the shoulders and apply the skin technique there as well. Anywhere you are going to expose the body suit, apply the latex.
Do the same for the legs.
Once these areas are completely dry, spray paint the “skin” the dark brown and then go over it with the tan paint.
After that is dry, go back with the Black Sharpie pen making the skin look 3-D with “cuts” and “bullet holes”. The Red sharpie is used over the black pen to make the cuts and holes look red and irritated. Use Justin’s RAW or Diehard mask for reference.
Arm Pieces
While wearing the black shirt that the pieces are attached to, latex your arms one at a time.
Use the same skin making technique to do this.
Gloves/Hands
Buy some leather work gloves
Buy some skeleton gloves (at any costume shop)
Put on the skeleton gloves and then the work gloves.
Shred the gloves strategically so that the bones show through and expose a few fingers of the skeleton gloves.
Again, apply the latex skin over the skeleton gloves and paint accordingly.
Distress the work gloves so they look worn and used.
Boots
I am 6’1” and Jason is 6’5” so I bought platform boots from www.hottopic.com
You can also find them on Ebay. They should be about 3-4 inch platforms.
Paint these with brown and tan paint to look grungy and dirty.
Chain
Go to the local hardware store and buy about 4 feet of plastic chain and a screwing connector piece.
Paint the chain flat black and rust colored.
I used a real chain one year and it gets really heavy as the night goes on.(not recommended!)
Clothes part 2
Once everything is painted the way you want and everything is dry, put on the bodysuit and then put on the green pants and shirt. Get some screen caps of Friday the 13th Part 7 and start shredding the shirt and pants accordingly.
Make sure you leave a lot of dangling pieces and vary the size of holes and tears in the clothing.
After you are satisfied with the amount of holes and the look of it is what you want. Take off the shirt and pants and spray paint around the holes Flat Black. This makes the clothes look gross, wet and old.
After everything is dry put it all on and send me pics!!!!!
E-mail me with any specific Q’s
jedifyfe@hotmail.com
Mask
RAW2 from Justin on NIGHTOWLpro.com
I cut out the eyes and nose to see and breathe better
[B]Back Spine
Buy Justin’s RAW Back piece
Hockey
In bought this mask on Ebay
I don’t know the seller’s ID
Make sure it looks beat up and dirty
Clothes
Go to the local thrift store and find a Olive Green Shirt and Long Olive Green pants (the pants should be about 4-5 inches longer than your feet.
Buy some flat green and flat black camouflage spray paint from a hardware store.
Buy a tight black long sleeve shirt and black stretch pants (woman’s are okay)
Buy the “zombie” costume or pieces somewhere.
Buy some liquid latex from a costume store or from online (it’s really easy to work with)
Get a roll of paper towel or toilet paper
Get some flat dark brown and tan spray paint
Buy a Black and Red Sharpie pen
Once you have all these pieces put on the black shirt and pants, put on the zombie pieces on top of that and pin the zombie pieces in place, take the suit off.
Brush the liquid latex around the edges of the zombie pieces, adhering them to the shirt and pants in place.
After the first layer of latex dries, apply a second and third coat, before the third layer dries apply the paper towel or toilet paper onto the latex and brush another coat on after that (the paper towel gives texture and looks like gross skin when it dries)
Brush on the latex on the shoulders and apply the skin technique there as well. Anywhere you are going to expose the body suit, apply the latex.
Do the same for the legs.
Once these areas are completely dry, spray paint the “skin” the dark brown and then go over it with the tan paint.
After that is dry, go back with the Black Sharpie pen making the skin look 3-D with “cuts” and “bullet holes”. The Red sharpie is used over the black pen to make the cuts and holes look red and irritated. Use Justin’s RAW or Diehard mask for reference.
Arm Pieces
While wearing the black shirt that the pieces are attached to, latex your arms one at a time.
Use the same skin making technique to do this.
Gloves/Hands
Buy some leather work gloves
Buy some skeleton gloves (at any costume shop)
Put on the skeleton gloves and then the work gloves.
Shred the gloves strategically so that the bones show through and expose a few fingers of the skeleton gloves.
Again, apply the latex skin over the skeleton gloves and paint accordingly.
Distress the work gloves so they look worn and used.
Boots
I am 6’1” and Jason is 6’5” so I bought platform boots from www.hottopic.com
You can also find them on Ebay. They should be about 3-4 inch platforms.
Paint these with brown and tan paint to look grungy and dirty.
Chain
Go to the local hardware store and buy about 4 feet of plastic chain and a screwing connector piece.
Paint the chain flat black and rust colored.
I used a real chain one year and it gets really heavy as the night goes on.(not recommended!)
Clothes part 2
Once everything is painted the way you want and everything is dry, put on the bodysuit and then put on the green pants and shirt. Get some screen caps of Friday the 13th Part 7 and start shredding the shirt and pants accordingly.
Make sure you leave a lot of dangling pieces and vary the size of holes and tears in the clothing.
After you are satisfied with the amount of holes and the look of it is what you want. Take off the shirt and pants and spray paint around the holes Flat Black. This makes the clothes look gross, wet and old.
After everything is dry put it all on and send me pics!!!!!
E-mail me with any specific Q’s
jedifyfe@hotmail.com