Buzzzzzzzz

[travsall ●]

I have a sheet of plastic I\'m going to use. I\'ll just trace the end of the bar that\'s on the saw onto it, then draw out a longer one, cut that out, make jaged teeth all the way around, and paint it up. Later at night no one will be able to see there\'s no blade spinning, plus I\'m making a bit of a heavy gas mixture for some extra smoke!

[slasher ●]

what do you mean by bigger bar like the handle?

[jasonxmask ●]

The bar is the piece the blade rotates around. Longer bar means langer blade.

[The13thDreamShape ●]

I have a sheet of plastic I\'m going to use. I\'ll just trace the end of the bar that\'s on the saw onto it, then draw out a longer one, cut that out, make jaged teeth all the way around, and paint it up. Later at night no one will be able to see there\'s no blade spinning, plus I\'m making a bit of a heavy gas mixture for some extra smoke!

Thats awesome.

Whats the heavy gass mixture gonna be? premium gas w/ 2 cycle engine oil is what i use. mine throws out a lot of smoke. all i want is a biiig blade. Also, where did u get the plastic?

[Krypt Kreeper ●]

Post some pics with your DS Ed Gein mask on if ya can Travis!

[travsall ●]

Yep, bigger bar is just a bigger blade minus the chain. The saw mixture is 16:1, so if I doubled that it should smoke a ton. The plastic I got from a buddy, he brought it to me from his work, so not sure of the specs really. What you want though is 1/4\" -1/2\" pvc plastic commonly called \'puck board\' you should be able to get some scraps pretty cheap from any plastic supplier around you, just phone them and say how much you need. (might be a good idea not to tell them what it\'s for though LOL!)
You got it Krypt Keeper! Next time I do some pictures I\'ll slap that on for ya!

[slasher ●]

Heh, why don\'t you just buy a bigger bar travis?

[The13thDreamShape ●]

thats awesome Travis! i might have to do that. For me, i would rather buy a bigger bar. i would make it, but i dont have the energy to do it. LOL... im lazy.. yes i know. thats awesoe travis. i cant wait. im on the lookout for a bigger bar too!

[travsall ●]

Bar\'s are fairly expensive, and if you\'re not going to be using it for cutting, it is a waste, plus I doubt they make one that big to fit on a smaller saw like this. Plus, I can really make it look mean,I plan on cutting some real nasty teeth into the plastic, so it looks like it has a chain on it. If you do want to buy a bigger bar, I\'d suggest going somewhere like a used tool store, or a surplus seller. Make sure it\'ll fit your saw though.

[ElmStreetProductions ●]

yeah, I just made my own stunt bar and tested it out in front of the neighbors kids...I think of it as helping them, beware of power tools and machinery