04-11-2009, 06:08 AM
I pulled all of these in the last two days...3 of them are gonna be mailed out next week, and one of them needs a bit of epoxy putty repair before it can be sold.By the way, the one with the black and gray specks on the surface is a casting made with ceramic powder sprinkled onto the mold before pouring the resin...There is no real difference other than the color of the unpainted blank, and it will make a better texture for receiving paint. I used talc in the other two castings for the same reason. They all turned out pretty nice, in my opinion! Not to mention that it's finally nice to have full casting pics with the mold closed up properly in back and a visible signature, too:<img src=\"http://i62.photobucket.com/albums/h98/MoonlitDevil/P1240121.jpg\" border=\"0\" class=\"linked-image\" /><img src=\"http://i62.photobucket.com/albums/h98/MoonlitDevil/P1240137.jpg\" border=\"0\" class=\"linked-image\" /><img src=\"http://i62.photobucket.com/albums/h98/MoonlitDevil/P1240140.jpg\" border=\"0\" class=\"linked-image\" /><img src=\"http://i62.photobucket.com/albums/h98/MoonlitDevil/P1240132.jpg\" border=\"0\" class=\"linked-image\" /><img src=\"http://i62.photobucket.com/albums/h98/MoonlitDevil/P1240151.jpg\" border=\"0\" class=\"linked-image\" /><img src=\"http://i62.photobucket.com/albums/h98/MoonlitDevil/P1240172.jpg\" border=\"0\" class=\"linked-image\" /><img src=\"http://i62.photobucket.com/albums/h98/MoonlitDevil/P1240175.jpg\" border=\"0\" class=\"linked-image\" />Thanks for looking and cheers,Ryan