Spfx Silicone Mask Repair Help?

[🪦 ianfxmen ●]

i need helpguys theres a crack of about half an inch on my spfx mask on the corner of the mouth. how can i repair it since it has to be flexible is there somewhere i can buy plat gel silicone in really small quantity or is anny other product could do the job i am soooo pissed please help thanks in advance...

[🪦 puckface ●]

Id sell it fast...to me...

[🪦 SuperDanDrista ●]

Ok here\'s what you do. You need to find clear silicone caulking. before you use it, use isoprophyl alcohol to clean the spot or the caulking won\'t stick right.

Spread the calking over the area carefully and build it up. it should dry clear and barely noticeble if you do it right.

Give it a full 24-48 hours to set up! It sets fast but doesn\'t cure for a couple days

Dan Drista

[🪦 mrmorningside ●]

id go with dan he knows his s334t and a good guy to boot

[🪦 krazedkilla ●]

Is this a common thing with SPFX masks? They have a video on their site telling you how to put it the mask on but how did it happen if you don\'t mind me asking? I also remember Dan\'s vampire mask had a small tear in it before he sold it to Will.

[🪦 mike ●]

peopel not putting it on right does it grabbing at the mouth area and tugging on it does that....also after u apply the caulk then use a heat gun or hairdryer heat cures it faster

[🪦 VF 31 ●]

yea u gotta be super careful with the mouth and eye areas...thats where it is the thinnest

[🪦 ianfxmen ●]

ok but silicone caulking is stiff no???will it be flexible enough for the mouth area since it needs to be flexible???what brand if caulking should i use ???????????dont you guys think plat gel would be better and flexier???

[🪦 Jason-V ●]

caulk is flexable..

[🪦 mike ●]

the same silicon used to make the mask is best but caulk works any clear caulk thast silicon