Scuff Marks!

[Pugsly ●]

I am working on a blank doing it part 3 style and i was wondering the best way to do scuff marks on it?Any help would be apreciaitted.

[DrownedGhoul7]

Oh shit,if i could remember what the scuff marks look like then I might be able to help you.Even though i have never worked on a blank before Im really good at this type of stuff.Any pics?

See ya,
Chris

[travsall ●]

Hey Pugs, best way I\'ve found is do the scratches first, then do a very light black wash over them to bring them out. After you have that, take a little of the black wash on your finger and just rub it lightly on the mask for the scuffs.

[The13thDreamShape ●]

why not rub pencil on it? then seal it? :ph34r:

[jason8844]

im not saying this is the best way just what i did...i put a litle bit of black acrylic paint on a knapkin and smeared it wear i wanted it, on the nose around the sides and top when it dried i sanded over the black acrylic paint just so it was noticible this made a great scuff mark on some places sand it down to the plastic if your using a white plastic mask it will make 2 colers the white plastic and white primer with black around it well i hope it helped you,
Nick