04-08-2004, 06:25 AM
Use a white or gray primer first so the paint sticks (spray on at least 3 coats). Let each coat dry for at least 30mins then use krylon almond or antique white spray paint as a base coat. Spray on at least 3 coats and dont hold the can of spray paint to close. After you put on the last coat of paint let it dry for at least an hour (I waited a day so the paint was fully dry) then rub on yellow oxide acrylic with either your finger, damp wash cloth, sponge etc to give it a yellowish tint then aply the red triangles. After that add black, dark grey and/or dark brown acrylic paint using the same method untill you get the desired look. Once thats done add a few coats of matte clear coat and let it dry and your done.
Lizzie Borden took an axe
And gave her mother forty whacks.
When she saw what she had done
She gave her father forty-one.
And gave her mother forty whacks.
When she saw what she had done
She gave her father forty-one.
But seriously sometimes a mask can look too airbrushed like some DMC masks I\'ve seen. I\'d recommend painting on the triangles with an air brush so they come out nice and smooth.
lol
