04-08-2004, 06:25 AM
Use a white or gray primer first so the paint sticks (spray on at least 3 coats). Let each coat dry for at least 30mins then use krylon almond or antique white spray paint as a base coat. Spray on at least 3 coats and dont hold the can of spray paint to close. After you put on the last coat of paint let it dry for at least an hour (I waited a day so the paint was fully dry) then rub on yellow oxide acrylic with either your finger, damp wash cloth, sponge etc to give it a yellowish tint then aply the red triangles. After that add black, dark grey and/or dark brown acrylic paint using the same method untill you get the desired look. Once thats done add a few coats of matte clear coat and let it dry and your done.
But seriously sometimes a mask can look too airbrushed like some DMC masks I\'ve seen. I\'d recommend painting on the triangles with an air brush so they come out nice and smooth.
lol
