Question For Mask Makers

[🪦 BRASFIELD32 ●]

When you have the mold complete.I used a release agent before molding.My question is before pouring your latex in the mold do I need to spray the mold with anything or will the latex pull release with no problem.(if i do need to what is best to use)Just wanted to be sure.How long do you let your latex sit in the mold before pouring out the excess for normal wearing thickness.I know some of you get frustrated with these questions so I apologize in advance,I just want to hear from someone who has been through the process...Thanks so much

[🪦 maskmaniac ●]

<!--quoteo(post=316454:date=Jun 7 2009, 06:53 PM:name=MASK4ME)<div class=\'quotetop\'>QUOTE (MASK4ME @ Jun 7 2009, 06:53 PM) <a href=\"index.php?act=findpost&pid=316454\"><{POST_SNAPBACK}></a></div><div class=\'quotemain\'><!--quotecWhen you have the mold complete.I used a release agent before molding.My question is before pouring your latex in the mold do I need to spray the mold with anything or will the latex pull release with no problem.(if i do need to what is best to use)Just wanted to be sure.How long do you let your latex sit in the mold before pouring out the excess for normal wearing thickness.I know some of you get frustrated with these questions so I apologize in advance,I just want to hear from someone who has been through the process...Thanks so much<!--QuoteEnd</div><!--QuoteEEndYou do not want to use release in your mold .. it will block the pores that will draw the water out of the latex ,, if you have enough of latex you can fill it up to the top and let it dwell for about 45 to 1 hour for a nice thickness .. or if you have a little just pour it in and swil it around to cover nicely and pour it back out .. do this 3 to 4 time 10 -15 min apart to get it thick .. you may also want to brush the first coat in to avoid air bubbles .. Hope this helps Lewis

[🪦 BRASFIELD32 ●]

Thanks lewis this is what i needed to know.Appreciate it