Question About Hood Masks

[🪦 syko2k2 ●]

I recently bought a burnt hood, and I have noticed that it is a little hard to get it to stay around your face. I tried using tape, but that didn’t work. Before I tried anything else that could possibly ruin the mask, I wanted to ask on here first. What would be the best way to get the hood opening to stay around my face?

I was thinking about that glue that comes with those fake cut things that you glue to your face. But I wasn\'t sure if that would ruin the mask in anyway.

I found this picture...
[url=\"http://forums.NIGHTOWLpro.com/index.php?act=Attach&type=post&id=4197\"]http://forums.NIGHTOWLpro.com/index.php?ac...pe=post&id=4197[/url]
This is what I would like it took look like.

If anybody could help me out, I’d appreciate it.

[🪦 puckface ●]

stuff the back of the mask untill your face is popping out of the front

[🪦 myers-san ●]

Well first I ould put it on....And if it is a hood and you want it to STAY around your face..turn it backwards and there you have it...Probably not safe tho\'




J-

[🪦 Bloodyaxe ●]

Don\'t I just look so purdy !!!!

[🪦 GBeninati ●]

well if you are 10 years old I suggest you age about 20 years, then it will fit

[🪦 jasonpt3 ●]

I recently bought a burnt hood, and I have noticed that it is a little hard to get it to stay around your face. I tried using tape, but that didn’t work. Before I tried anything else that could possibly ruin the mask, I wanted to ask on here first. What would be the best way to get the hood opening to stay around my face?

I was thinking about that glue that comes with those fake cut things that you glue to your face. But I wasn\'t sure if that would ruin the mask in anyway.

I found this picture...
[url=\"http://forums.NIGHTOWLpro.com/index.php?act=Attach&type=post&id=4197\"]http://forums.NIGHTOWLpro.com/index.php?ac...pe=post&id=4197[/url]
This is what I would like it took look like.

If anybody could help me out, I’d appreciate it.

[post=\"117763\"]<{POST_SNAPBACK}>[/post]

i have a facelift from mark i just put rag in it before i put it on and stuff it to the back after its on. it will push you face out threw the front of the mask like you want.

[🪦 mike ●]

ya they fit older people more but get some foam padding and attach it to the back

[VF31]

u can only do so much to with it being regular latex...but if u stuff it right it should be ok

[🪦 syko2k2 ●]

I went and bought some foam and some velcro, hopefully it will work.

[🪦 syko2k2 ●]

Yup, just velcroed a big piece towards the back of the mask and it works perfectly.