*Edit- prices lowered, combinations created, etc. FEEL FREE TO MAKE OFFERS*
I have up for sale my entire Fred costume that I used for last years Halloween.
I\'m selling it in pieces:
The costume consists of a fedora, latexfx’s Burnie mask, a custom made sweater, a knifed glove and stand, and a left-hand glove (latexfx). I prefer Paypal, no trades (need cash), and shipping is included in the prices.
Fedora:
The fedora’s a size large- I did the weathering-up myself- It\'s now a part of the mask set below: (or I will sell it individually for $40)
Mask:
I put a slit up the back of the Burnie mask as to make it wearable and glued on Velcro to the flaps for closure. It does not close “all the way” however; and the last picture shows the slight gap that appears when using the Velcro. Words of warning- The mask is a tight fit for me, and requires a bit of maneuvering to get into; so if you have a “big” head you probably won’t be able to get it on without tearing it up. It can still be used for display though, which is what it’s been doing ever since Halloween. I’ll throw in my Styrofoam headstand and eye inserts (Getting the eyes straight while using the headstand is also pretty tough to do. The Styrofoam head has an annoying tendency to move them out of place; as demonstrated in my pictures- so again, it will require a bit of maneuvering to get it to look right.) The Styrofoam stand is also unbalanced at the base; so you may have to stick a few napkins or something underneath it if that bothers you- I have no problems with it myself, just kind of an annoying fact. The Styrofoam also tends to pick off when taking the mask off or placing it on the headstand; you will notice the “wear-and-tear” on the nose in the pictures. This does not cause any problems other than having to pick up tiny pieces of Styrofoam. I\'m also adding the fedora into this combo- I’d like to get around $160 for the set.
Sweater:
The sweater is on ebay; [url=\"http://cgi.ebay.com/Freddy-vs-Jason-Replica-Sweater-Not-Mask-or-Myers_W0QQitemZ190119055537QQihZ009QQcategoryZ60361QQssPageNameZWDVWQQrdZ1QQcmdZiewItem\"]http://cgi.ebay.com/Freddy-vs-Jason-Replic...1QQcmdZViewItem[/url]
Glove and Stand:
The blades are dulled down, although there is a slight point to the tips. I bought the hand-stand later for display and I’ll throw that in as well. (The hand stand is a pain to work with though- it is difficult to get the glove onto it as the fingers do not move from side to side; they only move front to back and at the joints. And you can’t position the glove in just any position since the added weight can make the entire stand fall down if it isn’t evenly dispersed. The fingers also are not long enough to extend to the top rings of the glove. However, these nuisances can be worked around to get the display to look decent- as shown in my pictures.) I’d like to get around $115 for the set.
LatexFX Left-Hand:
*Sold*
I described everything I could think of; if anyone has any questions feel free to ask.
Thanks for looking!
I have up for sale my entire Fred costume that I used for last years Halloween.
I\'m selling it in pieces:
The costume consists of a fedora, latexfx’s Burnie mask, a custom made sweater, a knifed glove and stand, and a left-hand glove (latexfx). I prefer Paypal, no trades (need cash), and shipping is included in the prices.
Fedora:
The fedora’s a size large- I did the weathering-up myself- It\'s now a part of the mask set below: (or I will sell it individually for $40)
Mask:
I put a slit up the back of the Burnie mask as to make it wearable and glued on Velcro to the flaps for closure. It does not close “all the way” however; and the last picture shows the slight gap that appears when using the Velcro. Words of warning- The mask is a tight fit for me, and requires a bit of maneuvering to get into; so if you have a “big” head you probably won’t be able to get it on without tearing it up. It can still be used for display though, which is what it’s been doing ever since Halloween. I’ll throw in my Styrofoam headstand and eye inserts (Getting the eyes straight while using the headstand is also pretty tough to do. The Styrofoam head has an annoying tendency to move them out of place; as demonstrated in my pictures- so again, it will require a bit of maneuvering to get it to look right.) The Styrofoam stand is also unbalanced at the base; so you may have to stick a few napkins or something underneath it if that bothers you- I have no problems with it myself, just kind of an annoying fact. The Styrofoam also tends to pick off when taking the mask off or placing it on the headstand; you will notice the “wear-and-tear” on the nose in the pictures. This does not cause any problems other than having to pick up tiny pieces of Styrofoam. I\'m also adding the fedora into this combo- I’d like to get around $160 for the set.
Sweater:
The sweater is on ebay; [url=\"http://cgi.ebay.com/Freddy-vs-Jason-Replica-Sweater-Not-Mask-or-Myers_W0QQitemZ190119055537QQihZ009QQcategoryZ60361QQssPageNameZWDVWQQrdZ1QQcmdZiewItem\"]http://cgi.ebay.com/Freddy-vs-Jason-Replic...1QQcmdZViewItem[/url]
Glove and Stand:
The blades are dulled down, although there is a slight point to the tips. I bought the hand-stand later for display and I’ll throw that in as well. (The hand stand is a pain to work with though- it is difficult to get the glove onto it as the fingers do not move from side to side; they only move front to back and at the joints. And you can’t position the glove in just any position since the added weight can make the entire stand fall down if it isn’t evenly dispersed. The fingers also are not long enough to extend to the top rings of the glove. However, these nuisances can be worked around to get the display to look decent- as shown in my pictures.) I’d like to get around $115 for the set.
LatexFX Left-Hand:
*Sold*
I described everything I could think of; if anyone has any questions feel free to ask.
Thanks for looking!