11-15-2004, 10:19 PM
Here is an easy way out for ya.
Go to Home Depot and get a Lazy Susan kit, 2 round pieces of pressed board and a spin kit.. Then grab a piece of PVC 1 inch pipe and a flange. You need a little screw piece to connect the pipe to the flange. Get a wig head and scrape the inner hole a little bigger and slide it on the PVC.
Presto!!
You will need to measure eye distance and the neck and head sizes on yourself or someone else and add a bit to those measurements.
Total cost will be about $25...
The thing about shipping a piece done in clay is that its going to get destroyed durring shipping
Dont be hell bent on making a mask too soon. Just practice and have fun
Go to Home Depot and get a Lazy Susan kit, 2 round pieces of pressed board and a spin kit.. Then grab a piece of PVC 1 inch pipe and a flange. You need a little screw piece to connect the pipe to the flange. Get a wig head and scrape the inner hole a little bigger and slide it on the PVC.
Presto!!
You will need to measure eye distance and the neck and head sizes on yourself or someone else and add a bit to those measurements.
Total cost will be about $25...
The thing about shipping a piece done in clay is that its going to get destroyed durring shipping
Dont be hell bent on making a mask too soon. Just practice and have fun