01-13-2007, 11:49 AM
I have alot of premade misc items I need to clear out, these are done by me unless specified otherwise.
"Hoggle", from "Labyrinth" 1/1 Scale latex 2 piece bust, foam filled, glass eyes, multiple types of hair, and the finish. It will set on a wooden display stand. Ready to ship. Stands roughly 18" from neck to hat.
$155 including shipping.
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Hoggle/Picture087.jpg[/image]
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Hoggle/IM001306.jpg[/image]
I could also do these as a mask without the eyes or the foam filled for $125 including shipping, they would take a week per order.
"Frank the Bunny" from "Donnie Darko" display bust. This is a bust I did with one of my Frank masks. I created the hood and partial suit affixed over an upper shoulders form on top of an all black metal and wood display stand.
The mask and hood could actually come off to be worn, but the partial suit on the shoulder form would remain intact. Its intended to be displayed but with the seperation of the hood and mask, it could be worn since there are the same eye holes, straps, and foam affixed to the mask as normally when I made just the masks themselves.
Price is $175 including shipping. I can make more though if anyone is interested after this one.
"Reverse Bear Trap" replica, from "Saw". I have 2 of these made up to go. The price on each is $220 including shipping. They are cast in urethane resin, and assembled with some metal parts. The lock is a working metal lock, the key is of course included. The paint is weathered rust colored done in layers to mimic the decayed metal of the trap seen in both "SAW" and "SAW 3". This is considered fragile, its meant to be displayed, but can also be worn. It is not a working device, nor could be tampered with to allow it to work. Simply a static replica of one of the most imaginative torture devices I\'ve personally seen.
I can also do display heads as pictured. They are foam mannequin heads plastered over with hydrocal atop of a wooden and metal display stand. The reason for the rough stone looking display is thats how "Jigsaw" had it displayed in the first "SAW". The stands are $25 extra.
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Reverse%20Bear%20Trap/WeddingWife005.jpg[/image]
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Reverse%20Bear%20Trap/IMG0531.jpg[/image]
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Reverse%20Bear%20Trap/IM001240.jpg[/image]
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Reverse%20Bear%20Trap/IM001242.jpg[/image]
I also have other items available which are made to order. Those include:
"Marv", from "Sin City". Foam filled latex bust with glass eyes, display stand, hair, and illuminescent by light bandages.
$120 including shipping
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/MarvGlamor2.jpg[/image]
"Yellow Bastard", from "Sin City". I only have about 2 good pulls left. I am discounting these at $75. Latex mask. Eyes will come removed, only the natural eyes. Although, I will not cut any of the eye if specified.
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/YellowFront.jpg[/image]
"SAW" Doll. "Billy", the infamous doll from the trilogy of "SAW" films. Price is $300 including shipping. Tricycle is included. The doll pedals when the tricycle moves and also has a spring loaded jaw for manual talking. The doll has custom tailerd clothes to match the film doll. The underskeleton is a sturdy constructed frame which is affixed to the tricycle, but the doll can be removed from the tricycle. Which is how it comes shipped. The head is solid urethane resin and haired with black saw doll styled hair.
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/72_12.jpg[/image]
" A ClockWork Orange". "Alex" mask, $18 including
shipping.
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/IM001041.jpg[/image]
"Dim" mask, $15 including shipping.
$30 flat for both. Made from latex. Simple masks which replicate some of the most memorable masks worn in the cinemas.
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/IM001036.jpg[/image]
" A Texas Chainsaw Massacre". "The Pretty Woman" mask. Made from latex. Sealed dead skin paint job, hand stitched stitches, seperate neck piece, attatched hair, and a strap to hold it to your head. A replica of the mask "bubba" wore in the dinner scene, throughout the rest of the film.
Price is $150 including shipping
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Pretty%20Woman/Picture086.jpg[/image]
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Pretty%20Woman/Picture106.jpg[/image]
Thanks
Tyler Haslett
nofarmy@hotmail.com
"Hoggle", from "Labyrinth" 1/1 Scale latex 2 piece bust, foam filled, glass eyes, multiple types of hair, and the finish. It will set on a wooden display stand. Ready to ship. Stands roughly 18" from neck to hat.
$155 including shipping.
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Hoggle/Picture087.jpg[/image]
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Hoggle/IM001306.jpg[/image]
I could also do these as a mask without the eyes or the foam filled for $125 including shipping, they would take a week per order.
"Frank the Bunny" from "Donnie Darko" display bust. This is a bust I did with one of my Frank masks. I created the hood and partial suit affixed over an upper shoulders form on top of an all black metal and wood display stand.
The mask and hood could actually come off to be worn, but the partial suit on the shoulder form would remain intact. Its intended to be displayed but with the seperation of the hood and mask, it could be worn since there are the same eye holes, straps, and foam affixed to the mask as normally when I made just the masks themselves.
Price is $175 including shipping. I can make more though if anyone is interested after this one.
"Reverse Bear Trap" replica, from "Saw". I have 2 of these made up to go. The price on each is $220 including shipping. They are cast in urethane resin, and assembled with some metal parts. The lock is a working metal lock, the key is of course included. The paint is weathered rust colored done in layers to mimic the decayed metal of the trap seen in both "SAW" and "SAW 3". This is considered fragile, its meant to be displayed, but can also be worn. It is not a working device, nor could be tampered with to allow it to work. Simply a static replica of one of the most imaginative torture devices I\'ve personally seen.
I can also do display heads as pictured. They are foam mannequin heads plastered over with hydrocal atop of a wooden and metal display stand. The reason for the rough stone looking display is thats how "Jigsaw" had it displayed in the first "SAW". The stands are $25 extra.
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Reverse%20Bear%20Trap/WeddingWife005.jpg[/image]
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Reverse%20Bear%20Trap/IMG0531.jpg[/image]
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Reverse%20Bear%20Trap/IM001240.jpg[/image]
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Reverse%20Bear%20Trap/IM001242.jpg[/image]
I also have other items available which are made to order. Those include:
"Marv", from "Sin City". Foam filled latex bust with glass eyes, display stand, hair, and illuminescent by light bandages.
$120 including shipping
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/MarvGlamor2.jpg[/image]
"Yellow Bastard", from "Sin City". I only have about 2 good pulls left. I am discounting these at $75. Latex mask. Eyes will come removed, only the natural eyes. Although, I will not cut any of the eye if specified.
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/YellowFront.jpg[/image]
"SAW" Doll. "Billy", the infamous doll from the trilogy of "SAW" films. Price is $300 including shipping. Tricycle is included. The doll pedals when the tricycle moves and also has a spring loaded jaw for manual talking. The doll has custom tailerd clothes to match the film doll. The underskeleton is a sturdy constructed frame which is affixed to the tricycle, but the doll can be removed from the tricycle. Which is how it comes shipped. The head is solid urethane resin and haired with black saw doll styled hair.
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/72_12.jpg[/image]
" A ClockWork Orange". "Alex" mask, $18 including
shipping.
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/IM001041.jpg[/image]
"Dim" mask, $15 including shipping.
$30 flat for both. Made from latex. Simple masks which replicate some of the most memorable masks worn in the cinemas.
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/IM001036.jpg[/image]
" A Texas Chainsaw Massacre". "The Pretty Woman" mask. Made from latex. Sealed dead skin paint job, hand stitched stitches, seperate neck piece, attatched hair, and a strap to hold it to your head. A replica of the mask "bubba" wore in the dinner scene, throughout the rest of the film.
Price is $150 including shipping
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Pretty%20Woman/Picture086.jpg[/image]
[image noborder]http://i4.photobucket.com/albums/y147/TylerHaslett/Pretty%20Woman/Picture106.jpg[/image]
Thanks
Tyler Haslett
nofarmy@hotmail.com