Holy Moses! We Just Found The Hero Part 1 Freddy Glove!

[🪦 ReellyScary ●]

<!--quoteo(post=308039:date=Apr 6 2009, 07:22 PM:name=IbDaToNeGuY)<div class=\'quotetop\'>QUOTE (IbDaToNeGuY @ Apr 6 2009, 07:22 PM) <a href=\"index.php?act=findpost&pid=308039\"><{POST_SNAPBACK}></a></div><div class=\'quotemain\'><!--quotecwell aside from the ring finger with the solder spills , i don't see anything that really matches with the screen caps <img src=\"style_emoticons/<#EMO_DIR#>/confused.gif\" style=\"vertical-align:middle\" emoid=\":confused:\" border=\"0\" alt=\"confused.gif\" /> . can you get any good pics of the rest of the fingers and backplate to closely examine it more ? i see that the rivets holding the fingers on the plate are different sizes and that could help out much more as i don't think most glove makers would goo that far in the detailing of their gloves but then i could be wrong . plus what's with all that green on it too ? mike,<!--QuoteEnd</div><!--QuoteEEndThe green is due to the elements...moisture etc... I checked out some other shots of the original glove and I am fully convinced that this is indeed the original. Look at the promo shots for Nightmare 2.....and look REAL close...aside from age spots to the copper.....the markings are the same.

[🪦 mpetrie ●]

<!--quoteo(post=308042:date=Apr 6 2009, 05:30 PM:name=ReellyScary)<div class=\'quotetop\'>QUOTE (ReellyScary @ Apr 6 2009, 05:30 PM) <a href=\"index.php?act=findpost&pid=308042\"><{POST_SNAPBACK}></a></div><div class=\'quotemain\'><!--quotecThe green is due to the elements. Moisture etc... I checked out some other shots of the original glove and I am fully convinced that this is indeed the original. Look at the promo shots for Nightmare 2.....and look REAL close...aside from age spots to the copper.....the markings are the same.<!--QuoteEnd</div><!--QuoteEEndExactly... I have a large poster showing the glove so many of the details are easy to spot. I am confident that as more and more people study these photos... more and more people will realize that the Hero has truly been identified and is in the posession of a fellow message board poster (though not this forum). This is great and exciting news for all Nightmare fans.

[🪦 liquidaluminum ●]

<!--quoteo(post=308039:date=Apr 6 2009, 07:22 PM:name=IbDaToNeGuY)<div class=\'quotetop\'>QUOTE (IbDaToNeGuY @ Apr 6 2009, 07:22 PM) <a href=\"index.php?act=findpost&pid=308039\"><{POST_SNAPBACK}></a></div><div class=\'quotemain\'><!--quotecwell aside from the ring finger with the solder spills , i don't see anything that really matches with the screen caps <img src=\"style_emoticons/<#EMO_DIR#>/confused.gif\" style=\"vertical-align:middle\" emoid=\":confused:\" border=\"0\" alt=\"confused.gif\" /> . can you get any good pics of the rest of the fingers and backplate to closely examine it more ? i see that the rivets holding the fingers on the plate are different sizes and that could help out much more as i don't think most glove makers would goo that far in the detailing of their gloves but then i could be wrong . plus what's with all that green on it too ? mike,<!--QuoteEnd</div><!--QuoteEEndWhile I've got my doubts about this glove as I've been comparing the pics that we have vs. some screencaps that I've got, I can answer your question about the green. The green comes from natural oxydation of the copper. That's why the Statue of Liberty is blue green. I've seen plenty of copper take on that green hue over the years. It's just a natural process.-Joseph

[🪦 IbDaToNeGuY ●]

that'd be good to know . so since i don't go to FS , how did this topic get started on the other site ? did the guy just get it , is he trying to seel it , just wanting info , or what ? how did he come across finding it in the first place ? i personally think it would be cool to have someone let Robert know that the glove has finally been found after all these years and see what he says about it . not that he'd prob. care but i just thought it would be rather interesting . mike,

[🪦 mpetrie ●]

The glove sold on an auction site under the presumptive story that it was a glove built for the 5th film and came with a COA. Someone saw this glove sell for $700 and he tracked down the buyer and was able to buy it off of him for an undisclosed amount. The glove is now in that person's posession and I am completely sold that the story about it being from the 5th film is bogus. A lot of stories can be made up after 20+ years. Again though... the photos I post later tonight should convince everyone that it's really the "one". <img src=\"style_emoticons/<#EMO_DIR#>/biggrin.gif\" style=\"vertical-align:middle\" emoid=\"\" border=\"0\" alt=\"biggrin.gif\" />

[🪦 johnp ●]

He gives the story of his acquisition of this glove on Frightstuff. He is not trying to sell it, that I know of.Edit: Mark just explained above ;P

[🪦 mpetrie ●]

The lucky punk...

[🪦 mpetrie ●]

Here we go fellas... comparison photos:<img src=\"http://i301.photobucket.com/albums/nn47/knifegloves/Compare.jpg\" border=\"0\" class=\"linked-image\" />This photo compares the break in the index blade. You can tell in both photos that the blade is soldered side by side.<img src=\"http://i301.photobucket.com/albums/nn47/knifegloves/Compare1.jpg\" border=\"0\" class=\"linked-image\" />This photo compares the solder marking on the end of the blade, the size of the rivet on the index finger, and also the small solder marking where the ringlet was attached.<img src=\"http://i301.photobucket.com/albums/nn47/knifegloves/Compare2.jpg\" border=\"0\" class=\"linked-image\" />This one compares the irregularly cut "U" shape in the base of the middle fingertip. You can easily see that the curve is angled up more on the right side of the blade.<img src=\"http://i301.photobucket.com/albums/nn47/knifegloves/Compare3.jpg\" border=\"0\" class=\"linked-image\" />This photo compares a TINY marking in the copper from the cutting tool on the pinky finger. You can easily see it wasn't a perfect cut since the edge of the copper disappears for a bit.<img src=\"http://i301.photobucket.com/albums/nn47/knifegloves/Compare4.jpg\" border=\"0\" class=\"linked-image\" />This photo compares the positioning of the rivets on the ring and pinky fingers. Notice the rivet on the ring finger joint is not as close to the edge of the copper as the pinky finger is.(Continued below)

[🪦 mpetrie ●]

<img src=\"http://i301.photobucket.com/albums/nn47/knifegloves/Compare5.jpg\" border=\"0\" class=\"linked-image\" />This photo compares the easily seen soldering line on the ring finger. As you can see, the line is identical.<img src=\"http://i301.photobucket.com/albums/nn47/knifegloves/Compare6.jpg\" border=\"0\" class=\"linked-image\" />This photo compares the larger rivet on the middle finger and also a small downward "hump" on the edge of the copper on the bottom of the middle finger.<img src=\"http://i301.photobucket.com/albums/nn47/knifegloves/Compare7.jpg\" border=\"0\" class=\"linked-image\" />This final photo compares the staining on the backplates. The images have been modified to enhance the staining. The photo on the right was taken from the opening sequence of Nightmare 1. The stain is nearly identical, though the current photo seems to have a slight bit of additional aging but you can surely tell that the stains are practically the same.Ladies and gents.... the Hero has been discovered.

[🪦 johnp ●]

Great pictures Mark. Awesome those features are visible. The irregular "U" on the base of the middle finger tip is one I was looking for.I'm becoming pretty convinced this is the hero as well.