Mask Making Help Needed.

[🪦 CreepingDead ●]

No, you don\'t have to pour and repeat. You can just let it dwell for about an hour. That makes a good wearable thickness (time and thickness will vary depending on the latex and what the mold is made of). Doing multiple pours in and out will build it up thick.

The thicker you pour it, the more it shrinks FYI

[🪦 Hauntmaster9 ●]

If you\'re pressed for time, you can get a spray bottle of vinegar and as soon as you drain the mold from your first pull spray the inside lightly with vinegar and it\'ll instantly gel and be ready for the next pour.

[🪦 mike ●]

plaster of paris is $$ for 100lbs ur gonna spend close to 40.00 a 25lbs here is like 8.79 io cna get ultrcal cal for 24 100 lbs but if your not makign a master mld then others plaster are fine..personally i dont like dwelling but thats me who am i t osay anything listen to aaron he knows bout these things

[🪦 gmyers ●]

Go with what Mikes saying.
I would never recommend going with plaster of paris, ultra cal is cheaper and ALOT better.

[🪦 SPAZ ●]

:angry: :angry: :angry:

[🪦 Hauntmaster9 ●]

I never pay more than 7 for 25 pounds. I\'m not saying it\'s better than ultracal but if you\'re making several production molds then its just more economic I think, but what do I know anyway.

[🪦 kirk myers ●]

DELETE.....

Wrong thread... :blink:


*damnit*

[🪦 antboy ●]

i seam to recall ultra cal being more expensive than plaster,,plus i would have to pay for shipping, when i can get plaster locally.

[🪦 antboy ●]

anymore advice is greatly apprecciated

[🪦 SPAZ ●]

anymore advice is greatly apprecciated

[post=\"79330\"]<{POST_SNAPBACK}>[/post]

HA HA HA not anymore!!!
:angry: :angry: :angry: :angry: :angry: