12-05-2007, 01:52 AM
Personally, I never use epoxy, becaise no matter how good it is, it will chip off. I would, and do, the following. If you can peel it off without taking paint with it, I would remove it. if not, I would fill in under it, so that it takes awya from the greying effect. but if you can get it off. I would use a nice stretchable clear coat spray, in a spray paint can. I can't remember the brand, butI buy this stuff that has a white and blue paper lable, you can get it in the craft second at wallmart in the glue isle. I'm sure you can get it other places too. they sell gloss and mat. I use it for sealing all my masks with it has delicate weathering, like on a myers. but just spray it where you need it, but be warned, once it's on, it's on, so don't screw up... incoming thought...You could also think able using <i>tacky</i> glue, which will dry 3-d and wet looking, it is also flexable.Hoped I helped.Andrew S.<!--quoteo(post=247394:date=Dec 4 2007, 07:45 PM:name=Krypt Kreeper)<div class=\'quotetop\'>QUOTE(Krypt Kreeper @ Dec 4 2007, 07:45 PM) <a href=\"index.php?act=findpost&pid=247394\"><{POST_SNAPBACK}></a></div><div class=\'quotemain\'><!--quotecI have Death Studios Cutter mask I bought from a friend and the gloss around the mouth is chipping a little. On the DS site, Jeff reccomends using DevCon 5 minute Epoxy. My question is do I have to peel off the old gloss first or can I just apply the epoxy on top of it.<!--QuoteEnd</div><!--QuoteEEnd