09-28-2005, 03:02 AM
Quote:I\'m taking pics along the way...the clear coat is about dry, so I\'m ready to add some black.You really don\'t need to clearcoat until after you\'ve done all your layers. Most of the time, you need your surface to be somewhat rough to apply the washes. (Not too rough, but say... rubbed with some steel wool). Anyway, the clearcoat might make it too smooth to \'soak\' in. If you continue you apply clear coats between layers, at least rough up the surface a bit with some steel wool or 800 grit sandpaper. :wink:
[post=\"110996\"]<{POST_SNAPBACK}>[/post]