What Do I Need To Drill And Cut A Jman Hockey Mask?

[🪦 BELLAMY ●]

Im tempted to buy a lot of 10 .90 abs thick Jason masks off ebay right now. All are uncut and undrilled..... DO I need a dremel kit to cut and drill these?Anyone have some info or know a site with step by step instructions on how to prep a hockey mask?Thanks!

[🪦 Seabass ●]

As far as drillling the holes, you can just use a drill and a drill bit, bits for wood or metal work fine, just as long as it is the right size, I can't remember the exact size right now. A dremel really helps for the eyes and edges. You can drill holes in the eyes, as a pilot hole and take a drum sander bit for a dremel and shape and cut the eyes. A lot of blanks need to have the outside edges sanded down as well. A dremel is also handy for axe cuts, propeller damage, etc.

[🪦 BELLAMY ●]

nice,,,, thanks for the info.... what about the paints??? Should I use sprays or brushes???

[🪦 Darth Veach ●]

I saw those listings too. I have seen them before. The seller has 100% positive feedback. Anyone know if they are pretty accurate blanks?

[🪦 BELLAMY ●]

<!--quoteo(post=246012:date=Nov 18 2007, 04:14 PM:name=Darth Veach)<div class=\'quotetop\'>QUOTE(Darth Veach @ Nov 18 2007, 04:14 PM) <a href=\"index.php?act=findpost&pid=246012\"><{POST_SNAPBACK}></a></div><div class=\'quotemain\'><!--quotecI saw those listings too. I have seen them before. The seller has 100% positive feedback. Anyone know if they are pretty accurate blanks?<!--QuoteEnd</div><!--QuoteEEndI emailed him... he never responded... I asked him what mold they were made from....

[🪦 WHiTE_SiDER ●]

i think the seller is Josh!! is name on the board is HORRORCONCEPT just shoot him a pm <img src=\"style_emoticons/<#EMO_DIR#>/thumbsup.gif\" style=\"vertical-align:middle\" emoid=\":thumbsup:\" border=\"0\" alt=\"thumbsup.gif\" />

[🪦 mrmorningside ●]

hey brothose are made by josh from horrorconcepts and are very accurate and you cant beat the price he is 100% trustworthy shoot him a pm through NIGHTOWL hope this helpsmm

[🪦 Seabass ●]

You can use spray paint for the base color, what I do is use a gray primer to prime it and then use a flat or gloss, (depending on what you want) almond spray paint. From there you can draw your tris and masking tape them and you can use model paint for those, or I usually just use spray paint in a deep red for those. You can weather it by mixing acrylic paints with a little bhit of water to make a thinner wash and then seal it and build up the washes in layers, depending on how weathered you want it.

[🪦 ZombieTom ●]

<a href=\"http://www.youtube.com/watch?v=YK18wQA-tHs\" target=\"_blank\">http://www.youtube.com/watch?v=YK18wQA-tHs</a>

[🪦 BELLAMY ●]

<!--quoteo(post=246065:date=Nov 19 2007, 11:21 AM:name=Seabass)<div class=\'quotetop\'>QUOTE(Seabass @ Nov 19 2007, 11:21 AM) <a href=\"index.php?act=findpost&pid=246065\"><{POST_SNAPBACK}></a></div><div class=\'quotemain\'><!--quotecYou can use spray paint for the base color, what I do is use a gray primer to prime it and then use a flat or gloss, (depending on what you want) almond spray paint. From there you can draw your tris and masking tape them and you can use model paint for those, or I usually just use spray paint in a deep red for those. You can weather it by mixing acrylic paints with a little bhit of water to make a thinner wash and then seal it and build up the washes in layers, depending on how weathered you want it.<!--QuoteEnd</div><!--QuoteEEndModel paint like for model cars?.... Can I use that for the black weathering and the triangles?